240 MM Indian Scout “Stocker Wide Tire Kit”

Installing a custom 240 mm rear tire wheel on an Indian Scout adds a very powerful and enhanced look to your bike. For this reason, RC Components just released their new “STOCKER” wheel design for 2018. This massive 18″×8.5″ size wheel was created to match the factory Indian Scout front wheel with the benefit of saving money by using the factory pulley, rotors and front wheel.

The RC Components Indian Scout Wide Tire Kit is engineered to be an easy bolt-on application that allows any RC Components 18×8.5 wheel and 240 mm tire to be a perfect fit inside the factory Scout swingarm, with NO MODIFICATIONS necessary.

The Indian Scout Wide Tire Kit includes: 18×8.5 Rear “Stocker” Wheel, 240mm Rear Tire, Steel Rear Fender (uses the factory taillight and signals), Belt Guard, Chrome License Plate Mount. The “Stocker” wheel is available in chrome, Eclipse (black and machined) or solid black. MSRP: MSRP $2495.00.

For more information please visit or call RC Components 1-800-360-0915

27 Responses to “240 MM Indian Scout “Stocker Wide Tire Kit””

  1. 1 Donnie Feb 11th, 2018 at 10:08 am

    Looks pretty good. Tempted…

  2. 2 p.Hamilton Feb 11th, 2018 at 10:10 am

    Surprised that a 240mm looks so good on a small bike like the Scout. Well done RC comps

  3. 3 Greeco Feb 11th, 2018 at 10:13 am

    Maybe the Scout should be sold this way, a little bit more macho.

  4. 4 Boomer Feb 11th, 2018 at 11:25 am

    I like it. It makes this little bike look beefier.

  5. 5 Mike Feb 11th, 2018 at 11:33 am

    The only thing I don’t like is the original front tire has that “balloon” tire look as intended, but the new wide rear is typical low sidewall radial. Looks very mismatched.

  6. 6 Boots Feb 11th, 2018 at 12:44 pm

    Looks great, I would just cringe when it came time to replace it!!

  7. 7 BD Feb 11th, 2018 at 5:25 pm

    Lipstick on a pig

  8. 8 Woody's Feb 11th, 2018 at 6:31 pm

    Like Mike said. Tires not matching makes them look like they’re just using up leftover parts. Looking at the smaller radii of the front fender makes me want to get a job in the Concentric Circle Dept. With a bottle of bourbon and a crayon, I could be the boss.

  9. 9 James just another crazy kiwi Feb 11th, 2018 at 7:22 pm

    Most importantly what does it do to the handling ?

  10. 10 Xenu Feb 11th, 2018 at 8:21 pm

    Handing seems secondary to macho looks and an aggressive stance for a mere fifth of the bike’s value.

  11. 11 ozzie21 Feb 11th, 2018 at 9:23 pm

    I agree with Mike, Woody’s and Xenu….. not a bad idea…..but. Don’t get me wrong, the rear wheel looks really really good but when you look at it after a few seconds you notice the front & rear tires are very different in profile and don’t match. I’m expecting whatever handling there was is now totally whacked…. Also heavier and horsepower robbing….. to each their own I guess.

  12. 12 Chris Feb 12th, 2018 at 8:10 am

    Great bragging rights outside the bar

  13. 13 Al Gajda Feb 12th, 2018 at 8:45 am

    Looks cool, can’t get over the looks of the ” lego block ” engine though

  14. 14 Guzzigreg Feb 12th, 2018 at 11:31 am

    I’d rather my bike handle properly than look “macho”!

  15. 15 hacksaw Feb 12th, 2018 at 11:57 am

    just say no! to phat back types. they suck.

  16. 16 Kevin Feb 12th, 2018 at 2:00 pm

    Nice Victory rear fender. Not surprising parts for Victory and Indian’s are interchangeable…

  17. 17 Git Real Feb 12th, 2018 at 2:26 pm

    Yep….Trying to make a silk purse from a Sows ear.

    Terrible, absolutely terrible.

  18. 18 Eduardo Guillermo Feb 12th, 2018 at 2:30 pm

    “Git Real”. What’s your problem. Most love the Scout and I like this wheel setup. Will sell well. Bet?

  19. 19 Biggles Feb 12th, 2018 at 4:58 pm

    Much better looking than a sportster

  20. 20 Biggles Feb 12th, 2018 at 5:02 pm

    Kevin don’t know which victory that Gard came off or what parts a inter changeable nothing on the Chief is interchangeable with any victory.

  21. 21 Texaspoontangtappa Feb 12th, 2018 at 5:31 pm

    Not my cup of tea, but I bet it does great with sales.

  22. 22 Francesco Feb 12th, 2018 at 5:54 pm

    Elle est pas mal!!!mais je n’aime pas trop le style de la carrosserie.

  23. 23 BobS Feb 12th, 2018 at 6:18 pm

    Not many parts interchange between the Chief and a Victory, but the Indian Scout and Victory Octane are almost all interchangeable. I really like what is being attempted here, but like others it’s a swing and a miss. This is my biggest complaint with retro-izing a modern bike. The bike began development as the Victory Octane and was put on hold to give the design department time to make it look old so it could be released as an Indian. The engine cases, fenders, and exposed frame section just seem off. Even though the bike rides great. Put that back wheel on an Octane with a low profile 3.5” wide front and you have a real winner. Or, move Indian away from strict adherence to looking like something from 1940 and that would work too.

  24. 24 Pat h Feb 12th, 2018 at 9:15 pm

    The nail in the coffin for victory and the v rods was putting those stupid tires on them anything over 180 190 is plenty for a good handling bike, a good 160 series tire is more than the chassis will handle, rc is just trying to get rid of the rim blanks nobody is buying for their harleys anymore and bolting different hubs on them, what about the offset for clearance for belt new front pulley or just shove the wheel to the right, all it needs is a monochromatic paint job and OCC sticker

  25. 25 Highrider Feb 13th, 2018 at 1:43 am

    I’ll keep my Jackpot thanks.

  26. 26 Roberto Feb 13th, 2018 at 5:19 am

    Just add apes…

  27. 27 beentheredonethat Feb 15th, 2018 at 10:50 am

    hmmm NOW all they need is a delete kit for that incredibly large wash board radiator and that ugly monster would be worth riding

Comments are currently closed.
Cyril Huze